1G DSM Turbo 4G63 cyl head
Ported runners & valve seat pockets
Supertech SS valves
Supertech Dual Springs
Supertech TI retainers
Has one exhaust manifold stud (upper left) that appears to have been upsized to 10mm and tapped.
underdrive aluminum crank pulley for 6bolt 4G63 engine
Used ACT unsprung 4puck clutch disk for DSM 4G63 90-99
Part number: 4224004
AEM wideband gauge w/ wideband 02 sensor.
Aeromotive Adjustable Fuel Pressure Regulator with Gauge
Fuel upgrade set for 1G 90-94 DSM Eclipse Talon Laser...includes:
-8 Feed line from sending unit to "under car around steering rack"
-8 check valve
-6 hose to rail
Powdercoated red fuel rail w/ -6 adapter fittings
-6 hose to AFPR
Aluminum civic radiator with 2 electric fans (Mishimoto puller and Spal pusher) and blue silicone hoses.
AMS billet velocity stack sheetmetal intake manifold for 1G DSM or Galant VR4 with large intake port 90-94 1g style cyl head.
Throttle body flange: Ford & Q45 square flange w/ threaded holes.
Has a welded bung on each runner...
Used Apexi Integration turbo auto timer - universal application.
Autometer 5703 Phantom 2 1/16" 30spi boost vacuum mechanical gauge.
Autometer 7127 C2 Electric oil pressure 0-100psi gauge. 2 1/16" 52mm diameter. Includes sending unit (not shown in pics)
Autometer Phantom narrowband AFR oxygen sensor gauge. Taps into any OEM factory 0-1V oxygen sensor.
MAC Boost control solenoid for use with DSMlink ECMlink, AEM EMS, LinkECU, Haltech.
Set of Brian Crower BC102 280* cams for DSM 90-99
Fair condition, were installed in a fresh engine build, but I don't believe the engine was run more than initial startup and some idling. There is some surface corrosion that should clean up/off...
Buschur Racing Front Mount Intercooler Kit for 90-94 1G DSM Talon Eclipse Laser. Stainless piping, silicone couplings, clamps. Fits 2" bottom discharge turbos (most T3T4 variants, 20g, FP bolt on, ext). Looks to be a Spearco 216 core...
Complete clutch hydraulic system removed from a 91 GVR4 (also fits 90-94 DSM) includes:
Stainless steel clutch hydraulic line from master cyl to slave cyl. eliminates all oem hard lines and rubber hose.
remanufactured clutch master...
Competition Clutch Twin Disc Assembly:
Competition Clutch provides the most economical racing clutch for the active sport compact enthusiast and is the preferred assembly for the professional racer. We currently offer our 4140 Forged Steel Flywheel...
Complete AN fuel system:
5 gal aluminum fuel cell w/ foam. 12"x12"x10"
-10 SS Feed line with AN fittings
-6 SS return line with AN fittings
Aeromotive Adustable regulator w/ guage
Aeromotive Fuel rail w/ -10 fittings for 4G63 DSM
CX Racing aluminum radiator for 90-94 1G DSM w/ pusher and puller slim fans.
Edelbrock 75mm Throttle Body #3826, uses the same 4 bolt flange as a Q45 style throttle body.
CAN BUS EGT controller for standalone ecu. This will work with basically any ECU that has a CAN BUS input (Haltech, LinkECU, AEM)
New condition, never used. just removed from packaging.
Includes the control box, can cable, and...
Set of 4 Enkei RPF1 17" wheels Staggered width and offset. Tires in excellent shape
Set of 4 Enkei RPF1 17x8" wheels 45mm offset. 2 tires are good, 2 are worn...tires can be removed to facilitate cheaper shipping, or you can take them as is.
Shipping charge TBD...contact us for a quote.
03-06 Evolution Lancer Mitsubishi MAF air sensor
Used w/ filter adapter
Fuel Injector Clinic billet fuel rail for DSM. -6 and -8 fittings.
Set of silver Fidanza adjustable cam gears for 90-99 4G63 Eclipse Talon Laser Galant VR4 DSM and 03+ Evo8
Used fidanze aluminum flywheel for 4G63 6bolt AWD Talon, Eclipse, Laser, Galant VR4. one in stock, please look at photos to get an idea of condition
Fluidampr SFI rated crank pulley for 6bolt DSM 90-94 Eclipse Talon Laser
Forrester cast intake manifold for 1G cyl head. includes phenolic spacer. reversible for RWD application
FP cast intake pipe - no bov recirculation tube
Set of 4 1000cc PTE fuel injectors
Fuelab -6 billet fuel filter
Black and purple on hand
GSS342 Full Blown Double Pump sending unit with two Walbro 255 pumps. Will fit 1G DSM or GVR4.
Autometeter gauge cluster surround for two 52mm (2-1/16") aftermarket gauges - fits 95-99 Eclipse Talon 2G DSM
GM Air temp sensor for use in SD conversion - DSMlink, Haltech, AEM EMS, Linkecu
Basic Hallman manual boost controller
Hayame billet 2G engine bay fuse box cover.
chrome plating is starting to come apart around lettering. needs some TLC/sand/polish?
Innovate LC-1 wideband set. Includes 02 sensor, calibration switch, LED.
Jay Racing alternator relocation kit 1G DSM or GVR4 Includes saturn/GM style alternator with electric plug pigtail. Includes belt
Jeff Bush designs transfercase brace for 1g/2G DSM. This one came off an automatic Xcase....but I "think" these are universal.
JMF ignition coil relocation bracket with 1G 91-94 style ignition coil and PTU
Large fmic for 1G DSM
3" aluminum IC pipes - flanged for Tial BOV.
Blue silicone and tbolt clamps.
Core size: 24 x 12 x 4"
Will require custom mounting brackets, as the brackets for this one were welded to the car's rad support.
Magnus Motorsports sheetmetal intake manifold for 1G DSM 4G63 engine. This is the last sheetmetal version before they started producting the cast V3. This one is polished and flanged for ford throttle body.
Partial direct port methanol injection kit.
Devils Own meth tank, Snow Performance Pump, Vibrant distribution block, misc fittings. Will need 4 new nozzles, relay, and replacment 1/4" hose.
Set of 4 Mickey Thompson ET Drag bias ply slick in 26 x 8.5 x 15"
Price is picked up at our shop in Blairstown, NJ. Please contact me to discuss shipping options.
new condition, never mounted, still has stickers. Selling these for a local...
Used set of NGK spark plug wires for 2g DSM 95-99 Turbo 4G63 Eclipse Talon. Good useable condition.
OHM racing black silicone heater hoses 1G DSM
Performance Partout Red Tshirt
Full set of 2G Auto AWD engine/trans mounts with prothane inserts. This set is Trans top, Engine Tbelt side, and Front Trans, rear trans.
OEM Nissan Q45 throttle body with Nissan TPS sensor
has been modified for use on a "race" DSM with sheetmetal intake manifold....looks like vacuum hose barbs have been plugged and the idle control motor passage plugged.
Aftermarket aluminum radiator for 2G DSM 95-99 Talon Eclipse Laser. This should fit all turbo 4G63 cars, FWD/AWD, Stick/Auto
Includes two aftermarket fans